Drayton Thermostat Not Clicking? Here’s Why

And we’re back again with another edition of “why do my things not work?” This is, arguably, one of DreamyHome’s favourite topics, as we just love to fix things (or, I suppose help you fix things).

The most common causes for a Drayton thermostat not clicking are a lack of batteries, a change in settings, or the need for a reset.

Now without further ado, let’s get your thermostat back to …. um, thermostatting? That can’t be right…

Drayton Thermostat Problems & Fixes

Now there are a lot of things that can go wrong with a thermostat and HVAC system. They’re complicated machines with complicated parts, and if a single piece stops working, the whole thing goes down. Luckily for you, the most common part to fail is the thermostat! Now, what can go wrong with a Drayton thermostat?

Read Next: Why is my Sabre boiler’s red light on?


AA batteries

This should be your first stop for every battery-powered device when it stops working. We always insist that we replaced the batteries, “just the other day!” right up until we swap them out indignantly, only to see the display light up. Don’t be that guy – replace your batteries. And while we’re at it, if you’re not using rechargeable batteries, why? They make your life so much easier and serve as a visual reminder that, “oh yeah, those are due for a change.”

Long story short, dead or dying batteries can lead to a number of things that you might not expect, such as:

  • Unlit or dark screen on your thermostat
  • Failure to activate the HVAC system
  • No audible “click” noise when activating (because it’s not activating)
  • And changes in settings (or a loss of them entirely)
  • Short cycling (HVAC stops the heating or cooling cycle far too early)

So if you notice any (or all) of these – consider swapping those batteries out for freshly-charged ones.

READ NEXT: Learn more about why your boiler is clicking (and other noises).

Circuit Breaker

circuit breaker

This should be your second stop for all devices in your home that use electricity. While your Drayton thermostat should be battery-powered and wireless, your HVAC system isn’t. Go to your circuit breaker (don’t worry, I’ll wait).

Okay, now that you’re at the main, do you notice any breakers flipped? If so, flip those bad boys right back to the on position and wait. You should, in a matter of minutes, hear your HVAC kick back on – and if you were at your thermostat, you’d likely hear that beautiful “click” that we’ve missed so much.

If this is a recurring problem, you may need to make some changes to your electrical system. Try moving your HVAC to a separate circuit or removing other electronics from that circuit. It’s possible that there’s just too much going on with that particular circuit to function properly.

Read Next: Everything you need to know about Vaillant boiler temperature settings.

Check the Settings

thermostat settings

Now for the final “easy” fix. Take a look at your Drayton thermostat’s settings. There are a few things that could be happening here:

  • You have never touched the settings
    • This is an ideal situation in terms of fixes, as it makes your life easier. More likely than not, your thermostat has factory settings saved that it’s automatically using. While that’s fine in theory, it could be causing your manual temperature settings to be overridden. Try setting a few manual settings that you regularly use and test them out.
  • You have lost the settings you saved
    • This is a sign that your thermostat lost power, if only for a moment. It could also be the sign of a dying thermostat, so this is a bit of a win and lose scenario we’re looking at. If you’ve replaced the batteries and reset your old settings, wait. If they go away again, you’ll need to replace the thermostat.
  • Settings have changed from what they were
    • This could be caused by one of two things:
    • 1) your housemate(s) changed the settings without you knowing. This is fixed with communication and cooperation.
    • 2) Your device power-cycled and reverted to factory settings. The solution is the same as above – replace the batteries, and if that fails, replace the thermostat.

READ NEXT: Broken thermostat or user error?

Resetting Your Drayton Thermostat

resetting thermostat

If you’re unsure still what’s causing your Drayton thermostat not clicking, there’s one easy fix to try before either replacing the thing or calling an HVAC engineer. You can manually reset your Drayton thermostat to factory settings, essentially putting it back to a blank slate. To do this:

  1. Open the draws covering your battery slot in the Drayton wireless thermostat.
  2. Replace the batteries without closing the draws.
  3. Bring the thermost as close as possible to its reciever (preferably touching it, or as close as possible)
  4. Turn the power off at the main, then turn it back on again – this resets the reciever.
  5. Press and hold button 1.
  6. Press and hold button 2 until you see a red light flashing
  7. Close the right draw, then left.
  8. Pres plus/minus
  9. Success!

Final Thoughts

Drayton wireless thermostats are awesome – right up until they stop working. If you’ve noticed a change in your HVAC’s performance (such as short cycling or a full stop in function), your best first bet is to look at the thermostat. Begin by replacing the batteries and checking that the breaker hasn’t flipped, as these are commonly overlooked and easy fixes. After that, move on to the thermostat’s settings. Ensure they haven’t changed, and if they have, reset them.

After that, it’s time to perform a manual reset. By doing this, you’re bringing your thermostat back to a “blank slate,” allowing it to restart, so to speak. If none of these solutions solved the issue, it’s likely time for a new thermostat and/or a visit from your friendly local HVAC engineer.

And as always, don’t hesitate to call a professional for help. They exist to make your life easier, and believe it or not, they do their job rather well. They’ll pinpoint the problem much quicker than you’d be able to, and get you back up and running in no time.