Top Tips On How To Remove A Built-In Oven

Taking out a built-in oven does not have to be a big deal. Our guide will show you the basics to manage a successful removal!

To remove a built-in oven, it’s best to tackle the task as a two-person team and to remove the appliance in stages; doors and electrical connections among others.

Are you a first-timer? No worries. We created this step-by-step guide to help anyone remove a built-in oven safely and without a fuss.

What Do You Need To Remove A Built-In Oven?

Sometimes you may need an upgrade in the kitchen or you just want to obtain the oven’s serial number (these well-hidden digits are usually located on the other side of your inbuilt oven). Perhaps you just need to change the heating element for a new one. Whatever your reason is, the reality is that one must remove the whole unit.

Without further ado, let’s have a look at your toolbox. For this project, you will need to gather the items below.

  • Convince another person to help you (this might be the hardest part!).
  • Good-quality electrical tape.
  • Screwdrivers (flathead or star head).
  • A sharp pair of wire cutters.
  • Normal tape.
  • A non-contact voltage tester.

What Are The Steps To Remove A Built-In Oven?

Are you ready to tackle this project like a professional? Great stuff. Here are the steps to complete the job successfully.

Step 1 – Remove The Power Supply

This is an incredibly important step and to skip it could endanger your life as well as the person who is helping you. Working with any electrical appliance, big or small, carries the risk of electrocution. It is essential to remove that risk entirely for the safety of everyone involved.

In this case, the oven should be disconnected from the power supply before any attempts are made to remove it. Have a look and make sure that you have turned off the breaker to your wall oven. Take the tester and do a power check before removing any of the wires from the wall connection. If the power is off, the tester will not flash an alarm.

Find out the top reasons why your oven fan is blowing cold air and how to fix the issue.

Double Built In Electric Oven By SIA

Step 2 – Remove The Oven Doors

To remove the doors, you need to become more familiar with the design of your oven. Some oven doors can be removed by sliding them up or down off the hinges. If the oven door is attached to the hinges with screws, you will need to use a screwdriver to remove them before lifting the door off the hinges.

Take care to work gently so that you do not damage any part of the door or doors. Once you are done removing it, carefully place the door out of the way and in a safe position so that it does not fall over.

Step 3 – Remove Some More Screws

Pull that extra person closer for this step! This task involves removing the trim pieces of the bottom wall oven. Remove the remaining screws around the edges of the wall to release them from the wall.

Step 4 – Remove The Electrical Wires

Once again, for this step, you will be working with an electrical section and even though the power is off, play it safe and test for an active current. Should your tester show that there is no power, you can proceed.

Take the wire cutters and cut the wires. Alternatively, you can also connect the wires back to the electrical box on the wall behind the oven.

Find out the top 7 reasons why your oven is smoking and how to fix it.

Step 5 – Remove The Base Cover Plate

Oh, happy day. This is the moment that you have been waiting for. Carefully remove the screws that connect the base cover plate to the electrical box. Once all the screws have been removed, the oven is free to be removed. Do so carefully to avoid the appliance from being damaged. If there is any rusted edges make sure not to cut yourself on them, either.

When you have successfully removed the built-in oven, remember that others can also get hurt. Place it somewhere in a safe place to prevent children, pets, and other adults in the home from accidentally rubbing against sharp edges or pieces.

Step 6 – Clean The Area

Once the oven is completely removed, it is time to clean the wall cavity. Sometimes, years or even decades can pass without this cavity ever being cleaned. Now’s your chance! Sweep away all of the dust, old cobwebs, and other debris. If you love cleaning, then you can even whip out a bucket of water and your favourite detergent (but that is entirely optional).

Step 7 – Secure The Connectors

After you cleaned the wall cavity, you can now finish up with the wiring. Replace the connectors inside the electric box on the wall. Secure the connectors onto the wires with electrical tape. If you are replacing the oven you can leave the wiring intact.

A Quick Summary On How To Remove A Built-In Oven

  • Built-in ovens are removed for repairs, a replacement oven or to read the serial number at the back.
  • A built-in oven can be removed at home.
  • The project can be done by yourself but an extra pair of hands will make the job a lot safer and quicker.
  • An essential part of this project is to switch off the power at the start and to check for electrical currents whenever you work with any wiring.
  • Most of the work involves removing screws and disconnecting the wiring.
  • Once removed, the oven must be kept away from pets, children, and vulnerable adults.